Vatech Smart Plus PHT-35LHS, Installation Manual

Page: 141 / 165

9. Installing Software
Smart Plus (PHT-35LHS) Installation Manual 135
En
glis
h
Selecting an Announcement Mode: Music or Beep (Optional)
If selecting an announcement between music and beep is necessary , perform the
following procedures.
Command specifications:
Command format: [SPM_MPOP_XXXX]
XXXX Imaging Modes
Announcement
Mode
Division
0000 CT/PANO Music Different for each mode
0001 CT/PANO Music Same for each mode
0002
(Default)
CT/PANO Beep Same for each mode
1. Send the command following the command specification, as specified in the table
above.
Here are some examples.
Default mode: 0002(beep) for each imaging mode.
< When the same Music Announcement is desired for CT and PANO imaging
modality >
Enter the command [SPM_MPOP_0001] in the command field.
< When the same Beep Announcement is desired for CT and PANO imaging
modality >
Enter the command [SPM_MPOP_0002] in the command field.