Vatech PaX-Reve3D, Installation Manual

Page: 22 / 56

PaX-Reve3D
20
Next do the same, as follows.
11. Please make sure that there is enough room to work.
① Insert the supplied Guide Shaft Assembly into the column and move it up fully so that one end of
it falls in the hole. ( Figure 2)
②
Next pull it down through the hole and match the end of it onto the hole on the base. ( Figure 3 )
③
Do this procedure again for the other one. ( Figure 4 )
④
Finally turn to make them tight, using the spanner.
Figure 1 Guide Shaft Assembly Figure 2 Base