Revision: 2
Date: 11-15-19
VASHON AIRCRAFT RANGER R7 MAINTENANCE MANUAL
5.7.8-11
NOTE
The general removal, inspection, and assembly procedure are outlined below. For
more information on the removal, inspection, and assembly of the brake and
w
heel assemblies, please see the manufacturer’s manual.
(a)
Deflate the tire.
(b)
Break the tire bead loose from the wheel.
(c)
Remove the 6 bolts fastening the hub and wheel halves together and pull
them apart. Note: be careful not to damage the inner tube valve stem.
Figure 5.7.8.6 Nose wheel disassembly.
(3)
INSPECTION
(a)
Axle
•
Visually inspect the axle to make sure there are no cracks or
grooves.
(b)
Replace unserviceable parts as required.
(4)
NOSE WHEEL ASSEMBLY
(a)
Apply a thin layer of talcum powder on the clean inside surface of the tire if
needed.
(b)
Slightly inflate the tube inside the tire to negate pinching during assembly.
