11
Vasa Swim Ergometer User’s Manual
May 2015
Figure C - adjusting ANGLE
adjust ANGLE by rotating on ball and socket.
Do NOT slide left and right, use stem to slide
Figure D - adjusting POSITION
adjust POSITION of PM by sliding
stem Left & Right
SLIDE STEM
ONLY
Do NOT hold PM
to slide left to
right
Tighten hose clamp
Figure B
Insert mounting ball into socket
mounting ball
cable
channel
Figure A
mounting
stem
hose clamp
(over socket end)
PART 1 - Assembly
STEP 10: POWER METER - INSTALLING & ADJUSTING
NOTE: The Power Meter may automatically turn ON when the cables are connected. Before beginning
your workout, turn the monitor OFF and wait a second or two until you hear a beep. Push the ON button
to power back on and begin your workout.
10.1. Slide the hose clamp over the stopper pin and position the clamp over the end of the socket (to
cover prongs). Insert the mounting ball into the socket (Figure A).
10.2. Establish the desired viewing angle and secure it by tightening the hose clamp with your screw
driver to secure in position (Figure B).
10.3. The mounting stem is designed to allow for customized viewing. To adjust the ANGLE (tilted up
and down, tilted right and left), use the ball and socket (Figure C). To move the POSITION (right side or
left side), be sure to use the stem to slide the Power Meter right or left (Figure D).
IMPORTANT: Do NOT slide the Power Meter to adjust Left and Right position. You will NOT have to
loosen the Hose Clamp for any of these adjustments.
