53
•
Position the energy store
without battery module at the setup site.
•
Mount the power connector (black) onto the port (1). The closure locks in audibly.
•
Mount the replacement power connector (light grey) onto the port (2). The closure locks in audibly.
•
Sockets 5 and 6 are intended for the connection of the current measurement and the network.
i
Changing the plant settings requires that there be a network connection.
•
Adjust the levelling feet (pos. 6 and 7 on the next image) to a height of approximately 4 cm.
•
Be aware that the maximum height of the levelling feet is 5 cm.
•
Align the storage cabinet with a spirit level.
•
When adjusting, ensure that you comply with the maximum height
of the levelling feet of 5 cm.
•
Fasten the energy store to the back wall. To this end, turn the
fastening angle outwardly 90°.
No. Designation
1
Converter
2
Battery charger 1 (BL 1)
3
Battery charger 2 (BL 2)
4
Battery charger 3 (BL 3)
5
2 fastening screws per battery module right
6
2 levelling feet
7
2 levelling feet
8
2 fastening screws per battery module left
9
Battery module 3 (BM 3)
10 Battery module 2 (BM 2)
11
Battery module 1 (BM 1)
