Page 29
POSITION FOR THE FIFTH STAGE (UNIT 1)
The position for the fifth stage (unit 1) sets the
air inlet position when the fifth stage (unit 1)
begins to operate.
Adjusting the position for the fifth stage
(unit 1):
•
rotate the Selector dial to position (9),
•
rotate the Adjustor dial counterclockwise to
decrease the position for the fifth stage
(unit 1),
The position for the fifth stage (unit 1) is
displayed on the DIP-1/115, and is adjusted in
opening percentage (0-100%).
Example: As shown in the example of page 19, this
function is not available because the fifth stage on the
ECS-5M is in heating mode. The DIP-1/115 displays “---”.
CHAPTER 3 - USER’S GUIDE
www.monitrol.com
