O
PERATION
ProStar 400 AutoSampler
23
TIME AUX 1 ON
Parameter shows only when auxiliaries are enabled in System
settings. Enter time at which auxiliary 1 must switch ON: 0-
99'59".
TIME AUX 1 OFF
Parameter shows only when auxiliaries are enabled in System
settings.
Enter time at which auxiliary 1 must switch OFF: 0-99'59".
TIME AUX 2 ON
See AUX 1.
TIME AUX 2 OFF
See AUX 1.
Cooling Control (optional)
Sample tray temperature control is switched ON/OFF in the
COOLING CONTROL mode.
With the ProStar 400 in READY status, key in F,7 to select
COOLING CONTROL mode. Press PROG/END to switch ON or
OFF the cooling control.
The sample tray cooling has a fixed temperature of 4°C.
TRAY COOLING
(ON/OFF)
Enter 0 to switch OFF the sample tray cooling.
Enter 1 to switch ON the sample tray cooling.
NOTE:
After power up, the sample tray cooling is always off.
RUN
When programming is complete, system is ready and the
ProStar 400 AutoSampler is in READY status, press
START/STOP key to start automatic processing of the samples.
During RUN, the ProStar 400 will show information relevant to
the actual process such as: SEARCH VIAL 45, LOOPFILL,
WASHING, etc. During analysis time the display will show the
following information continuously (example):
0 VIAL:15 82 2'INJ 4 C
pTIME 03:45 AUX 1 2
Summary of Contents for ProStar 400
Page 2: ......
Page 28: ...2 03 914786 00 3...
