Vari Lite VL3500 SERIES, User Manual

Page: 30 / 86

VARI ❋ LITE
®
- VL3500™ S
ERIES
L
UMINAIRE
U
SER
’
S
M
ANUAL
14 31-July-2004 02.9678.0019 0
Floor Mounting the Luminaire
The luminaire enclosure is sufficient to stabilize the luminaire in a floor
installation, provided that the mounting surface is flat and sturdy.
Connecting Data and Power
A maximum of 32 luminaires may be connected in any one DMX data link
Note: This maximum limit applies to the luminaire "daisy chain" only Your system or console may
require fewer luminaires on a single data link path. Consult your console documentation for more
information.
To connect power and data:
Step 1. Connect data cable from console to first lumin ire in chain at DATA IN connector.
Step 2. If required, connect additional data cables fr m DATA THRU connectors to DATA IN
connectors of remaining luminaires n link.
Step 3. At last luminaire in link, install a DMX termination connector at DATA THRU connector.
(Luminaires and other devices o the same DMX chain may not function properly without
termination.)
Step 4. Connect AC input cable connector to power input source.
Step 5. Dress AC input and da a cables and secure them so that they will not interfere with
luminaire head and yoke movement.
Figure 2-5: Connecting Power and Data
ATA HR
E TER ME
A P R
ATA
~
A
ATA THR
E T R ME
A P R
ATA
~
A
HR
E TER ME
A
ATA
DMX Termination Connector
Data Thru Data Thru
Data In
(from console)
www.carlosmendoza.com.mx