Vari Lite VL3500 SERIES, User Manual

Page: 46 / 86

VARI ❋ LITE
®
- VL3500™ S
ERIES
L
UMINAIRE
U
SER
’
S
M
ANUAL
30 31-July-2004 02.9678.0019 0
A timing value of zero is full speed. A time value of 100% (or 255 in DMX) enables the associated
parameter(s) to follow cue fade time (console time) rather than the timing channel.
Note: The particular storing syntax for your console, as well as instructions on how to write part c s,
can be found in the operation manual for that console.
To use these channels, you must:
Step 1. Create the cue, including color, gobo, edge and diffusion as required.
Step 2. Decide which fixtures and which parameter groups will use timing channel
Step 3. Assign a value to the particular timing channel(s) you wish to use (for timing information,
see chart on next page).
Step 4. Set console timing (or cue fade time) for parameters and timing channels to zero seconds.
Step 5. Store cue.
Note: Avoid changing timing channel values in a fading cue Th can cause unexpected behavior in
the luminaire as the timing channel value is updated ver ime Timing channel values and the final
destination of the parameters affected by the timing cha nel should always be sent in a zero count.
www.carlosmendoza.com.mx