Vari Lite VL3500 SERIES, User Manual

Page: 66 / 86

VARI ❋ LITE
®
- VL3500™ S
ERIES
L
UMINAIRE
U
SER
’
S
M
ANUAL
52 31-July-2004 02.9678.0019 0
Menu Function Definitions
For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Table 4-2: Menu Function Definitions
Display Definition Purpose
10 Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes o non use.
30 Sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds o no -use.
5 Min 5 Minutes Sets Menu Display to automatically shut off after 5 minu es of non-use.
Address Address Accesses option for setting luminaire DMX starting address.
All @1 All At Once Tests all internal mechanisms at once, in two ste s
All SEQ All Sequence Tests all internal mechanisms in sequence for X steps.
Yellow Yellow Specifies yellow color parameter for manual control ( Manual ) or testing ( Test ).
Cyan Cyan Specifies cyan color parameter for ma al c trol ( Manual ) or testing ( Test ).
Cal ON Calibration On Configures arc luminaire so tha lam will strike after calibration.
Chan XXX DMX Channel Specifies DMX channel for display f current data value.
Chg LumID Change
Luminaire ID
For future use .
ColrMix Color Mixer Specifies color mixing me hanism for testing ( Test ).
ColorWhl Color Wheel Specifies color wh el fo manual control ( Manual ) or testing ( Test ).
Config System
Configuration
Accesses opti s for setting lamp, pan/tilt, and Menu Display defaults. Also
accesses la p inf rmation such as number of hours used, along with its respective
reset fun ion.
CTO CTO Function Spec fies CTO (color temperature orange) parameter for manual control ( Manual ) or
testi g ( T st ).
Data DMX Data Ac esses option for setting DMX address channel.
Dimmer Dimmer Specifies dimmer mechanism for manual control ( Manual ) or testing ( Test ).
Disable Disable Disables a function.
Display Display Accesses options for Menu Display illumination defaults.
DMX DMX Accesses options for DMX system settings.
Download Down oad Initiates download of luminaire software.
Edge Edge Specifies edge function for manual control ( Manual ) or testing ( Test ).
Enable Enable Enables a function.
Enco r Encoder Accesses pan/tilt encoders for diagnostic testing.
FAIL Test Fail Indicates that a test has failed.
Fi Gobo Gobo Wheel 1 Specifies gobo wheel 1 (rotating gobo wheel) for manual control ( Manual ) and test-
ing ( Test )
Fixt Hrs Fixture Hours Displays total number of hours luminaire has been powered on.
Fixture Fixture Accesses luminaire information such as serial number, software version, and total
operation hours. Also accesses recalibration and download options.
Frame XX Frame Side Specifies individual shutter frames (Frame 1A, 1B, 2A, 2B, 3A, 3B, 4A, or 4B) in
shutter mechanism for manual control (
Manual ) and testing ( Test )
Head Mtr Head Motor Configures head movement options.
www.carlosmendoza.com.mx