Vari Lite VL3500 SERIES, User Manual, Page: 36 / 86

VARI ❋ LITE
®
- VL3500™ S
ERIES
L
UMINAIRE
U
SER
’
S
M
ANUAL
20 31-July-2004 02.9678.0019 0
To use control channel functions:
Step 1. Select an action to be sent*.
Step 2. Set control channel value for desired action (for example, 84 for reset). Hold value for 3
seconds.
Step 3. Set control channel value to zero. (This must occur without any scaling values. Action will
be voided if other values are detected between action value and zero.)
Note: A numerical keypad is required for sending values. An encoder or fader does not a low for a
quick value change, which is required to effect the control functions.
* = Only this step is required for Pan/Tilt mode.
www.carlosmendoza.com.mx