Vari Lite VL3500 SERIES, User Manual, Page: 72 / 86

VARI ❋ LITE
®
- VL3500™ S
ERIES
L
UMINAIRE
U
SER
’
S
M
ANUAL
58 31-July-2004 02.9678.0019 0
Troubleshooting
Error Messages
If a problem occurs during luminaire calibration, at the end of the calibration sequence the Menu
Display will cycle through any applicable error message(s) until the end of the list is reached. To
review the error messages again, it will be necessary to access them using the
Status fu ction
To access error messages:
Step 1. Press [Menu].
Step 2. Press [Up] / [Down] arrows until
Fixture appears. Press [Enter]
Step 3. Press [Up]/ [Down] arrows to access Status . Press [Enter]. (Display will now scroll
through any error messages or display OK if no errors.)
Table A-1: Error Message
Display Message
OK No Errors F und
Pan/No Sens Pan sensor not found.
Pan/Encoder/Fail Pan en oder failure.
Tilt/No Sens Tilt ensor not found.
Tilt/Encoder/Fail T encoder failure.
Index1/No Sen Gobo 1 Index sensor not found.
RotGobo/No Sens Rotating Gobo wheel sensor not found.
FixGobo/No S ns Fixed Gobo wheel sensor not found.
Dimm r/No Sens Dimmer sensor not found.
Cya /No Sens Cyan sensor not found.
Yellow/No Sens Yellow sensor not found.
Magenta/No Sens Magenta sensor not found.
ColWheel/No Sens Color wheel sensor not found.
CTO/No Sens CTO sensor not found.
Zoom/No Sens Zoom sensor not found.
Edge/No Sens Edge sensor not found.
www.carlosmendoza.com.mx