![background image](http://html2.mh-extra.com/html/vari-lite/vl2000/vl2000_service-manual_3511279035.webp)
M
AINTENANCE
: M
AINTENANCE
P
ROCEDURES
2
0 2 . 9 6 7 3 . 0 0 1 0 D
2 4- Ma rc h- 2 0 04
17
WARNING: Backcap and adjustment knobs will be HOT during lamp operation.
Wear gloves and/or use tools to prevent burns.
To align lamp:
Step 1. Power up luminaire and allow to warm up for ten minutes.
Step 2. Using internal menus select
Lamp
test to set beam. See
for more information.(If using console, set intensity to 100%, open beam size
iris and focus for hard edge.)
Step 3. Position beam on a white wall at a distance of 10' to 20'.
Step 4. At backcap, using vertical and horizontal knobs, adjust hot spot to center of
beam.
Step 5. Using focus knob, do one of the following:
a. For peaked field (VL2201), adjust hot spot for maximum center beam
intensity.
c. For flat field (VL2202), adjust beam for best spot.
Figure 2-4: Lamp Alignment
Vertical
Horizontal
Focus
Captive Knob for lamp access
(does not adjust beam)
Summary of Contents for VL2000
