Varex Imaging XRpad2 4343 Page 53 User Manual Download

Page: 53 / 74

www.vareximaging.com

XRpad2 4343

SER

ANUAL

Inspection

Result

Remedy

Date

Detector

Check that the detector is
not damaged.

Good/Bad Good/Bad Good/Bad Contact your dealer,

distributor, or device
manufacturer if there is a
problem.

Check the manufacturing
date of the battery pack to
ensure that its age is not five
years or older.

Good/Bad Good/Bad Good/Bad Replace the battery pack with

a new one and recycle the old
one.

Check that the battery pack
(wireless mode) or the
Protective Insert (wired
mode) is in the battery
compartment and the
sliding latches are closed.

Good/Bad Good/Bad Good/Bad Slide the battery pack or the

Protective Insert into the
battery compartment as
described in

“Section 10.5.1.3,

Removing the Battery Pack”
on page 21

Check that the battery pack
is not damaged.

Good/Bad Good/Bad Good/Bad Replace the battery pack with

a new one.

Check that the detector is
not loose and all screws are
fixed.

Good/Bad Good/Bad Good/Bad Contact your dealer,

distributor, or device
manufacturer if there is a
problem.

Version

2017-11-03

Summary of Contents for XRpad2 4343











































































Search results

Summary of Contents for XRpad2 4343

Reviews:

Related manuals for XRpad2 4343

Brands by name

Popular brands

Varex Imaging XRpad2 4343, User Manual

Search results

Summary of Contents for XRpad2 4343

Reviews:

Related manuals for XRpad2 4343

Brands by name

Popular brands