U
SER
M
ANUAL
www.vareximaging.com
vii
XRpad2 4343
For Your Safety
Handling
WARNING
Never disassemble, modify, or alter the X-ray detector, its components,
Battery Pack, battery charger, or accessories. Ignoring this warning
may cause electrical shock and/or unknown hazards, which may result
in severe personal injury, death, or substantial product damage.
WARNING
Do not touch the interface and power unit or cable and the patient at
the same time. Do not let the patient touch the interface and power
unit or cable. Ignoring this warning may cause electrical shock and/or
unknown hazards, which may result in severe personal injury, death,
or substantial product damage.
Caution
Place the X-ray detector horizontally on a flat, stable surface. If the
X-ray detector is placed vertically or in any tilted position, the X-ray
detector must be securely placed in the Bucky tray or securely fastened
to the X-ray detector enclosure or support structure. Ignoring this
caution may result in personal injury or damage to the product.
Caution
Do not exceed the maximum uniform load weight of 150 kg
distributed across the surface of the X-ray detector.
Caution
Do not exceed the maximum load weight of 100 kg distributed on an
area of 40 mm in a diameter of the X-ray detector surface.
Caution
Do not drop the X-ray detector. If the X-ray detector is dropped,
remove the X-ray detector from service, and immediately ask your
establishment’s safety representative to verify or re-validate the
proper function of the X-ray detector prior to resuming use of the
detector. Further use under abnormal conditions may result in severe
personal injury, death, or substantial product damage.
Caution
Do not expose the backside of the detector with X-rays. Always use the
top side of the detector for examinations.
Version
01
2017-11-03
