Vapotherm Q50, Instructions For Use Manual

Page: 15 / 32

Set-Up for Use
Mounting Positions
The compressor is intended for use in two configurations, stand-alone
on the floor or mounted to a Precision Flow Roll Stand. If the Q50
Compressor is intended to be used stand-alone, no further work is
required: the compressor comes with four compressor feet to limit
noise and vibrations coming from the unit and holds the compressor
the correct distance from the floor to accommodate cooling air to
exhaust from the unit.
WARNING: Do not remove the compressor feet. These are
designed to reduce noise and provide the required
space to allow the compressor to circulate sufficient
cooling air throughout the system. Removal of the
feet could result in overheating of the system and
excessive noise.
WARNING: Do not modify or alter the Q50 Compressor. Failure
to follow this warning may result in improper
operation, reduced life of the compressor, or failure
to deliver therapy.
Page 13