4. Press the water bottle holder on to the
Vapotherm Roll Stand approximately
four inches below the auto draining
water trap.
5. Insert the tube attached to the bottom
of the water trap into the hole in the
cap of the water bottle and press
the water bottle into the water bottle
holder.
Connecting the Air Hose
1. Push the end of the air hose onto
the DISS air fitting on the back of the
Q50 Compressor until it reaches the
threads. Rotate the collar on the air
hose, clockwise, so that the threads
engage with the DISS air fitting.
Tighten by hand.
2. Push the other end of the air hose on
the DISS air fitting on the back of the
Precision Flow unit. Rotate the collar
on the air hose so that the threads
engage with the DISS air fitting.
Tighten by hand.
CAUTION: The air outlet hose should be connected prior to
turning the compressor on.
Page 17
Summary of Contents for Q50
Page 1: ...Q50 Compressor Instructions for Use...
Page 2: ......
