Pole Mount
The Q50 Compressor comes with the ability to be mounted onto the
Precision Flow Roll Stand via the pole mounts located on the side of
the compressor. When mounting to a Precision Flow Roll Stand, the
bottom of the compressor must be placed on the Precision Flow Roll
Stand base and no greater than 8” from the ground. The compressor
also must be placed over two locking casters of the Precision Flow
Roll Stand. Improper mounting the Q50 Compressor on the Precision
Flow Roll Stand will result in a higher risk of tipping the IV pole unit.
The Q50 compressor is only to be mounted on a Precision Flow Roll
Stand.
Page 14
3100772 Rev E
Summary of Contents for Q50
Page 1: ...Q50 Compressor Instructions for Use...
Page 2: ......
