background image

1. Read all manuals included

with this product carefully.
Be thoroughly familiar
with the controls and the
proper use of the equipment.

2. Follow all local electrical and safety

codes as well as in the US, National
Electrical Codes (NEC) and
Occupational Safety and Health Act
(OSHA).

3. Only persons well acquainted with

these rules of safe operation should
be allowed to use the compressor.

4. Keep visitors away and NEVER allow

children in the work area.

Do not operate
unit if damaged

during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.

General Safety
Information

CALIFORNIA PROPOSITION 65

This product or its
power cord may

contain chemicals, including lead,
known to the State of California to
cause cancer and birth defects or other
reproductive harm. Wash hands after
handling.

GENERAL SAFETY INFORMATION

Since the air compressor and other
components used (filters, lubricators,
hoses, etc.), make up a high pressure
pumping system, the following safety
precautions must be observed at all times:

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

Description

Oilless compressors are designed for
do-it-yourselfers with a variety of home
and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols. 

Danger indicates an
imminently

hazardous situation which, if not avoided,
will result in death or serious injury.

Warning indicates
a potentially

hazardous situation which, if not avoided,
COULD result in death or serious injury.

Caution indicates a
potentially

hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.

Notice indicates
important

information, that if not followed, may
cause damage to equipment.

Unpacking

After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before putting
unit into service. In case of questions,
damaged or missing parts, please call 
1-800-543-6400 for customer assistance.

Have the date code, model number,
and parts list (with missing parts
circled) before calling.

Operating Instructions and Parts Manual

FP209501, FP209598, FP209599, FP209601 

FP209699DB, and FP209699DQ

L

IN619402AV  1/09

Breathable Air Warning

This compressor/pump is not
equipped and should not be used “as
is” to supply breathing quality air. For
any application of air for human
consumption, the air
compressor/pump will need to be
fitted with suitable in-line safety and
alarm equipment. This additional
equipment is necessary to properly
filter and purify the air to meet
minimal specifications for Grade D
breathing as described in Compressed
Gas Association Commodity
Specification G 7.1 - 1966, OSHA 29
CFR 1910. 134, and/or Canadian
Standards Associations (CSA).

DISCLAIMER OF WARRANTIES
In the event the compressor is used
for the purpose of breathing air
application and proper in-line
safety and alarm equipment is not
simultaneously used, existing
warranties shall be voided, and the
manufacturer disclaims any liability
whatsoever for any loss, personal
injury or damage.

STOP!

Record the Model No., Serial No. and date
of purchase located on the base below the
pump in the space below.

Model No. ____________________

Date Code ____________________

Date of purchase _________________

Retain these numbers for future reference

.

Oilless Compressors

DO NOT RETURN THE
PRODUCT TO THE
RETAILER! CALL 
1-800-543-6400

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

See Warranty on page 8 for important information about commercial use of this product.

© 2009 Campbell Hausfeld/Scott Fetzer

MANUAL

Summary of Contents for FP209501

























Reviews: