PAGE
REVISION:
DATE:
VAN'S AIRCRAFT, INC.
DATE:
03-03
3
05/01/14
REVISION:
PAGE
(Continued next page)
CATEGORY
QTY
ITEM
Required/Optional
Drills/Countersink/Taps 1
#3 Drill Bit
1
#10 Drill Bit
1
#11 Drill Bit
2
#12 Drill Bit
1
#16 Drill Bit
2
#19 Drill Bit
1
#21 Drill Bit
1
#27 Drill Bit
1
#29 Drill Bit
3
#30 Drill Bit
1
#30 Drill Bit 12" Long
1
#33 Drill Bit 6” Long
1
#36 Drill Bit
5
#40 Drill Bit
1
#40 Drill Bit, 12 " Long
1
#43 Drill Bit
1
#52 Drill Bit
1
1/4" Drill Bit
1
5/16" Drill Bit
1
Q (or 11/32nd) Drill Bit
1
Ream .311"
1
Ream 3/8"
1
Step Drill (Uni-bit) Preferably 1/4 to 7/8"X1/16 Step Increment
1
Countersink #8 Screw
1
Countersink #10 Screw
1
100° Machine Countersink Cutter w ith #12 Pilot
1
100° Machine Countersink Cutter w ith #19 Pilot
1
100° Machine Countersink Cutter w ith #27 Pilot
1
100° Machine Countersink Cutter w ith #30 Pilot
1
120° Machine Countersink Cutter w ith #30 Pilot
REQ RV-14
1
100° Machine Countersink Cutter w ith #40 Pilot
1
Countersink Micro Stop Cage
1
Drill Stops - #30 #40 #12
Optional
1
Angle Drill Kit (Alternately use the Economy 90
°
Attachment Listed Below )
Optional
1
Economy 90° Drilling Attachment
REQ RV-14
1
Threaded Shank Drill Set 6 pc. (or min. 1 ea. #40, #30, #12 bits) for 90
° Drill
REQ RV-14
1
1/4-28 Tap
1
5/16-24 Tap
1
3/8-16 Tap
1
3/8-24 Tap
1
4-40 Tap
2
6-32 Tap
1
8-32 Tap
1
10-24 Tap
CATEGORY
QTY
ITEM
Required/Optional
Dim pling/Riveting
1
Dimple Die-Reduced diam. (3/8” diam.) 3/32" Female Dimple Die
1
Dimple Die-Reduced diam. 1/8” diam Female Dimple Die
REQ FOR RV-14
1
Dimple Die Set 1/8" (100°)
1
Dimple Die Set 3/32" (100°)
1
Dimple Die Set #6 Screw
1
Dimple Die Set #8 Screw
1
Dimple Die Set #10 Screw
1
Dimpler 3/32" Pop Rivet
1
Dimpler 3/32" Vice Grip
1
Flush Head Rivet Set (Tall, 1/2" Thick - Squeezer)
2
Flush Head Rivet Set (Short, 1/8" Thick - Squeezer)
1
Flush Sw ivel Rivet Set - Rivet gun
Optional
1
Rivet Set - Offset 1/8" (With a Flat Ground on One Edge) - Rivet Gun
1
Rivet Set - 1/8" Cupped Set 3.5" - Rivet Gun
1
1/8 Protuding Head Rivet Set (Tall, 1/2" Thick - Squeezer)
1
Rivet Set - 3/32" (Cupped Set 3.5" - Squeezer)
1
Beehive Retainer Spring (Often Supplied w ith Rivet Gun)
1
Quick Change Spring (For Flush Rivet Sets, maybe Supplied w ith Rivet Gun)
1
Back Rivet Set
1
Hand Squeezer w ith 3” Deep Yoke
1
C Frame Riveting/Dimpling Tool
1
Back-Riveting Plate, .375[9.5mm] X 6[152mm] X 12[305mm]
1
Dimple Die Organizer
1
3M F9460PC VHB Tape (or Fuel Tank Sealant)
1
Rivet Tape
1
Rivet Cutter
1
Rivet Gauge Set
1
Hand Blind Rivet Puller "POP" Riveter PRP-26A, USM Corp./ or Equivelant
1
Bucking Bar - Anvil 1.9 lb.
1
Bucking Bar - Tungsten
Optional
1
Bucking Bar - Mini 1 lb.
(EXCEPT RV-12)
RV-ALL
