42PiS-07
RV-12iS
0
01/19/19
PAGE:
REVISION:
DATE:
VAN'S AIRCRAFT, INC.
AV-532L CABLE
F-1238-R
DRILL #30,
SECURE AV-532L CABLE
WITH PLASTIC TIE-WRAP 4"
F-1211A
APPROX.
1/2 [12.5 mm]
PLASTIC
TIE-WRAP 4"
F-1257B
F-1281-L
F-1281-R STIFFENER
Step 1: Drill #30 a hole in the center of the inboard flange of the F-1238-R as the location shown in Figure 1.
NOTE: When positioning and securing the AV-532L cable in the following steps, ensure that the AV-532L cable is not
rubbing on the sharp edge of of the F-1279-R Upper Right Skin stiffener, and is clear of all control cables.
Step 2: Route the AV-532L cable through the snap bushing in the F-1278.
Step 3: With the AV-532L cable extending outside the tailcone as shown, secure the AV-532L cable to the F-1238-R with a
tie-wrap. See Figure 1.
Step 4: Route the AV-532L cable from the F-1238-R to the stiffener of the F-1281-R Lower Skin. Cover the stiffener edge with a
F-1257B where the cable enters the stiffener.
Step 5: Secure the AV-532L cable and F-1257B to the stiffener of the F-1281-R with a tie-wrap
as shown in Figure 1.
FIGURE 1: SECURING THE AV-532L CABLE
54 [137.2 CM]
(PAST SURFACE OF F-1278)
F-1279-R STIFFENER
