VAN'S AIRCRAFT, INC.
PAGE:
REVISION:
DATE:
01/19/19
0
RV-12iS
42PiS-06
PILOT DRILL #30
THEN STEP-DRILL 5/8
Step 1: Drill #30 a hole in the F-1278 Top Skin at the location shown in Figure 1.
Step 2: Use a step drill to enlarge the #30 hole in the F-1278 to 5/8.
Step 3: Install the snap bushing into the F-1278 as shown in Figure 1.
Step 4: Cut strips of MS21266 Grommet to the length shown in Figure 2 to fabricate 8 of the F-1257B Cable Anti-Chafe Strips.
F-1278
FIGURE 1: DRILLING THE TAILCONE
SB625-7
FIGURE 2: FABRICATING THE F-1257B
(QTY 8 REQD)
SCALE 1 TO 1
3 [76.2 mm]
MS21266
