VAN'S AIRCRAFT, INC.
PAGE:
REVISION:
DATE:
01/19/19
0
RV-12iS
42PiS-16
4X
F-00132-R
F-00132-L
FIGURE 1: PREPARING THE F-00132-L & -R
Step 1: Separate the F-00132 Nav/Com Xpndr Firewall Bracket into the F-00132-L &
-R as shown in Figure 1. Note that the F-00132-R has a clearance notch, and the
F-00132-L does not.
Step 2: Machine countersink the nutplate rivet holes in the F-00132-L & -R,
then install the nutplates as shown in Figure 1.
K1000-08
2X AN426AD3-3.5
8X MACH CSK
(FLUSH THIS SIDE)
REMOVE HATCHED AREAS
FIGURE 3: PREPARING THE F-00054-1-L & -1-R
Step 5: Separate the F-00054-1 Inst Stack Angle Nav/Com by
removing the hatched areas shown in Figure 3.
Step 6: Machine countersink the nutplate rivet holes in the
F-00054-1-L & -1-R, then install the nutplates as shown in Figure 3.
6X
MS21055-L06
2X AN426AD3-3.5
8X
K1000-06
2X AN426AD3-3.5
F-00054-1-R
F-00054-1-L
REMOVE HATCHED AREAS
Step 7: Separate the TOOL-00004 Garmin RV-12iS Drill Templates into the three drill guides by removing the hatched areas
shown in Figure 4.
FIGURE 4: SEPARATING THE DRILL GUIDES
TOOL-00004
F-00132-L DRILL GUIDE
GEA 24 DRILL GUIDE
GAD 29 DRILL GUIDE
REMOVE HATCHED AREAS
FIGURE 2: INSTALLING THE NUTPLATES ON TO
XPNDR BRACKETS
4X
K1000-06
2X AN426AD3-3.5
8X MACH CSK
(FLUSH OPPOSITE SIDE)
F-00209
F-00210
Step 3: Machine countersink the nutplate rivet holes in the F-00209 Nav/Com Xpndr Bracket Right and F-00210 Nav/Com
Xpndr Bracket Left as shown in Figure 2.
Step 4: Install the nutplates onto the F-00209 and F-00210 as shown in Figure 2.
(CLEARANCE NOTCH)
