Vanco HDBaseT Lite, Instruction Manual

Page: 21 / 32

21
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
RESETTING TO FACTORY DEFAULT:
To reset EDID for all ports, simply set the DIP switch to
the above position when the matrix is powered OFF. On
powering ON, all ports will revert to the above factory
default and DIP switches can be adjusted as necessary.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV
Receiver copy)
For users who wish to copy EDID from an AV Receiver
with 7.1channel audio to a specific input port containing
a Blu-ray player, follow a variation on the instructions
above:
1 Set the DIP switch to the above position with the matrix
in the OFF position.
2 Connect the AVR to your desired OUTPUT port on the
matrix (for example, OUTPUT 2)
3 Power ON the matrix and select your INPUT your
chosen SOURCE is connected to (for example, INPUT
3 – Blu-ray)
4 Press and hold the OUTPUT SELECT button for 3
seconds for the EDID data to be copied from OUTPUT 2
(AVR) to INPUT 3 (Blu-ray).
1080p 3D Video / Stereo Audio (using embedded
M-series EDID)
Setting the DIP switch to this position
will instruct the matrix to use
embedded 1080p 3D compatible
video and Stereo audio EDID to
encourage communication between the matrix and
3D sources/3D displays if handshake problems are
encountered.
After setting the DIP switch, reconnect and turn on for
the changes to take effect.
1080p Stereo (using embedded A-series EDID)
The matrix will use embedded 1080p
video and stereo audio EDID in this
DIP setting.
After setting the DIP switch, reconnect and turn on for
EDID settings to take effect.
1080i Stereo (using embedded L-series EDID)
In instances where a connected display
is unable to achieve 1080p resolution
(such as using older or cheaper
models), this DIP setting will instruct
the matrix to use embedded 1080i video and stereo audio
EDID to output a signal.
After setting the DIP switch, reconnect and turn on for
EDID settings to take effect.
1080p 5.1ch Audio (using embedded D-series EDID)
When set to this DIP position the matrix
will use embedded 1080p video with
5.1ch Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080p 7.1ch Audio (using embedded G-series EDID)
When set to this DIP position the matrix
When set to this DIP position the matrix
will use embedded 1080p video with
7.1ch Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
Normal Output
Force Output
Instructs the Matrix to Output a signal
regardless of communication between
display and source compatibility. This
setting may be used to further
encourage compatibility between devices if other
DIP settings prove unsuccessful in establishing
communication.
Remaining settings no function
(reserved for future updates)
21 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
For example: If OUTPUT 3 is selected for INPUT 1, the EDID
for OUTPUT 3 will be copied to INPUT 1 – this is achieved by
the system setting HDMI OUTPUT as a higher priority than UTP
OUTPUT.
If EDID copy is not successfully completed, the INPUT Port EDID
will remain the unchanged.
RESETTING TO FACTORY DEFAULT:
To reset EDID for all ports, simply set the DIP switch to the above
position when the matrix is powered OFF. On powering ON, all
ports will revert to the above factory default and DIP switches can
be adjusted as necessary.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver
copy)
For users who wish to copy EDID from an AV Receiver with 7.1
channel audio to a specific input port containing a Blu-ray player,
follow a variation on the instructions above:
1 Set the DIP switch to the above position with the matrix in the
OFF position.
2 Connect the AVR to your desired OUTPUT port on the matrix
(for example, OUTPUT 2)
3 Power ON the matrix and select your INPUT your chosen
SOURCE is connected to (for example, INPUT 3 – Blu-ray)
4 Press and hold the OUTPUT SELECT button for 3 seconds for
the EDID data to be copied from OUTPUT 2 (AVR) to INPUT 3
(Blu-ray).
1080p 3D Video / Stereo Audio (using embedded
M-series EDID)
Setting the DIP switch to this position will
instruct the matrix to use embedded 1080p
3D compatible video and Stereo audio EDID
to encourage communication between
the matrix and 3D sources/3D displays if
handshake problems are encountered.
After setting the DIP switch, reconnect and
turn on for the changes to take effect.
1080p Stereo (using embedded A-series EDID)
The matrix will use embedded 1080p video
and stereo audio EDID in this DIP setting.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080i Stereo (using embedded L-series EDID)
In instances where a connected display is
unable to achieve 1080p resolution (such
as using older or cheaper models), this
DIP setting will instruct the matrix to use
embedded 1080i video and stereo audio
EDID to output a signal.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
1080p 5.1ch Audio (using embedded D-series EDID)
When set to this DIP position the matrix
will use embedded 1080p video with 5.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080p 7.1ch Audio (using embedded G-series EDID)
When set to this DIP position the matrix
When set to this DIP position the matrix
will use embedded 1080p video with 7.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
Normal Output
Force Output
Instructs the Matrix to Output a signal
regardless of communication between
display and source compatibility. This
setting may be used to further encourage
compatibility between devices if other DIP
settings prove unsuccessful in establishing
communication.
Remaining settings no function
(reserved for future updates)
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
21
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
For example: If OUTPUT 3 is selected for INPUT 1, the EDID
for OUTPUT 3 will be copied to INPUT 1 – this is achieved by
the system setting HDMI OUTPUT as a higher priority than UTP
OUTPUT.
If EDID copy is not successfully completed, the INPUT Port EDID
will remain the unchanged.
RESETTING TO FACTORY DEFAULT:
To reset EDID for all ports, simply set the DIP switch to the above
position when the matrix is powered OFF. On powering ON, all
ports will revert to the above factory default and DIP switches can
be adjusted as necessary.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver
copy)
For users who wish to copy EDID from an AV Receiver with 7.1
channel audio to a specific input port containing a Blu-ray player,
follow a variation on the instructions above:
1 Set the DIP switch to the above position with the matrix in the
OFF position.
2 Connect the AVR to your desired OUTPUT port on the matrix
(for example, OUTPUT 2)
3 Power ON the matrix and select your INPUT your chosen
SOURCE is connected to (for example, INPUT 3 – Blu-ray)
4 Press and hold the OUTPUT SELECT button for 3 seconds for
the EDID data to be copied from OUTPUT 2 (AVR) to INPUT 3
(Blu-ray).
1080p 3D Video / Stereo Audio (using embedded
M-series EDID)
Setting the DIP switch to this position will
instruct the matrix to use embedded 1080p
3D compatible video and Stereo audio EDID
to encourage communication between
the matrix and 3D sources/3D displays if
handshake problems are encountered.
After setting the DIP switch, reconnect and
turn on for the changes to take effect.
1080p Stereo (using embedded A-series EDID)
The matrix will use embedded 1080p video
and stereo audio EDID in this DIP setting.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080i Stereo (using embedded L-series EDID)
In instances where a connected display is
unable to achieve 1080p resolution (such
as using older or cheaper models), this
DIP setting will instruct the matrix to use
embedded 1080i video and stereo audio
EDID to output a signal.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
1080p 5.1ch Audio (using embedded D-series EDID)
When set to this DIP position the matrix
will use embedded 1080p video with 5.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080p 7.1ch Audio (using embedded G-series EDID)
When set to this DIP position the matrix
When set to this DIP position the matrix
will use embedded 1080p video with 7.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
Normal Output
Force Output
Instructs the Matrix to Output a signal
regardless of communication between
display and source compatibility. This
setting may be used to further encourage
compatibility between devices if other DIP
settings prove unsuccessful in establishing
communication.
Remaining settings no function
(reserved for future updates)
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
21 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
For example: If OUTPUT 3 is selected for INPUT 1, the EDID
for OUTPUT 3 will be copied to INPUT 1 – this is achieved by
the system setting HDMI OUTPUT as a higher priority than UTP
OUTPUT.
If EDID copy is not successfully completed, the INPUT Port EDID
will remain the unchanged.
RESETTING TO FACTORY DEFAULT:
To reset EDID for all ports, simply set the DIP switch to the above
position when the matrix is powered OFF. On powering ON, all
ports will revert to the above factory default and DIP switches can
be adjusted as necessary.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver
copy)
For users who wish to copy EDID from an AV Receiver with 7.1
channel audio to a specific input port containing a Blu-ray player,
follow a variation on the instructions above:
1 Set the DIP switch to the above position with the matrix in the
OFF position.
2 Connect the AVR to your desired OUTPUT port on the matrix
(for example, OUTPUT 2)
3 Power ON the matrix and select your INPUT your chosen
SOURCE is connected to (for example, INPUT 3 – Blu-ray)
4 Press and hold the OUTPUT SELECT button for 3 seconds for
the EDID data to be copied from OUTPUT 2 (AVR) to INPUT 3
(Blu-ray).
1080p 3D Video / Stereo Audio (using embedded
M-series EDID)
Setting the DIP switch to this position will
instruct the matrix to use embedded 1080p
3D compatible video and Stereo audio EDID
to encourage communication between
the matrix and 3D sources/3D displays if
handshake problems are encountered.
After setting the DIP switch, reconnect and
turn on for the changes to take effect.
1080p Stereo (using embedded A-series EDID)
The matrix will use embedded 1080p video
and stereo audio EDID in this DIP setting.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080i Stereo (using embedded L-series EDID)
In instances where a connected display is
unable to achieve 1080p resolution (such
as using older or cheaper models), this
DIP setting will instruct the matrix to use
embedded 1080i video and stereo audio
EDID to output a signal.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
1080p 5.1ch Audio (using embedded D-series EDID)
When set to this DIP position the matrix
will use embedded 1080p video with 5.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080p 7.1ch Audio (using embedded G-series EDID)
When set to this DIP position the matrix
When set to this DIP position the matrix
will use embedded 1080p video with 7.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
Normal Output
Force Output
Instructs the Matrix to Output a signal
regardless of communication between
display and source compatibility. This
setting may be used to further encourage
compatibility between devices if other DIP
settings prove unsuccessful in establishing
communication.
Remaining settings no function
(reserved for future updates)
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
21 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
For example: If OUTPUT 3 is selected for INPUT 1, the EDID
for OUTPUT 3 will be copied to INPUT 1 – this is achieved by
the system setting HDMI OUTPUT as a higher priority than UTP
OUTPUT.
If EDID copy is not successfully completed, the INPUT Port EDID
will remain the unchanged.
RESETTING TO FACTORY DEFAULT:
To reset EDID for all ports, simply set the DIP switch to the above
position when the matrix is powered OFF. On powering ON, all
ports will revert to the above factory default and DIP switches can
be adjusted as necessary.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver
copy)
For users who wish to copy EDID from an AV Receiver with 7.1
channel audio to a specific input port containing a Blu-ray player,
follow a variation on the instructions above:
1 Set the DIP switch to the above position with the matrix in the
OFF position.
2 Connect the AVR to your desired OUTPUT port on the matrix
(for example, OUTPUT 2)
3 Power ON the matrix and select your INPUT your chosen
SOURCE is connected to (for example, INPUT 3 – Blu-ray)
4 Press and hold the OUTPUT SELECT button for 3 seconds for
the EDID data to be copied from OUTPUT 2 (AVR) to INPUT 3
(Blu-ray).
1080p 3D Video / Stereo Audio (using embedded
M-series EDID)
Setting the DIP switch to this position will
instruct the matrix to use embedded 1080p
3D compatible video and Stereo audio EDID
to encourage communication between
the matrix and 3D sources/3D displays if
handshake problems are encountered.
After setting the DIP switch, reconnect and
turn on for the changes to take effect.
1080p Stereo (using embedded A-series EDID)
The matrix will use embedded 1080p video
and stereo audio EDID in this DIP setting.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080i Stereo (using embedded L-series EDID)
In instances where a connected display is
unable to achieve 1080p resolution (such
as using older or cheaper models), this
DIP setting will instruct the matrix to use
embedded 1080i video and stereo audio
EDID to output a signal.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
1080p 5.1ch Audio (using embedded D-series EDID)
When set to this DIP position the matrix
will use embedded 1080p video with 5.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080p 7.1ch Audio (using embedded G-series EDID)
When set to this DIP position the matrix
When set to this DIP position the matrix
will use embedded 1080p video with 7.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
Normal Output
Force Output
Instructs the Matrix to Output a signal
regardless of communication between
display and source compatibility. This
setting may be used to further encourage
compatibility between devices if other DIP
settings prove unsuccessful in establishing
communication.
Remaining settings no function
(reserved for future updates)
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
21 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
For example: If OUTPUT 3 is selected for INPUT 1, the EDID
for OUTPUT 3 will be copied to INPUT 1 – this is achieved by
the system setting HDMI OUTPUT as a higher priority than UTP
OUTPUT.
If EDID copy is not successfully completed, the INPUT Port EDID
will remain the unchanged.
RESETTING TO FACTORY DEFAULT:
To reset EDID for all ports, simply set the DIP switch to the above
position when the matrix is powered OFF. On powering ON, all
ports will revert to the above factory default and DIP switches can
be adjusted as necessary.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver
copy)
For users who wish to copy EDID from an AV Receiver with 7.1
channel audio to a specific input port containing a Blu-ray player,
follow a variation on the instructions above:
1 Set the DIP switch to the above position with the matrix in the
OFF position.
2 Connect the AVR to your desired OUTPUT port on the matrix
(for example, OUTPUT 2)
3 Power ON the matrix and select your INPUT your chosen
SOURCE is connected to (for example, INPUT 3 – Blu-ray)
4 Press and hold the OUTPUT SELECT button for 3 seconds for
the EDID data to be copied from OUTPUT 2 (AVR) to INPUT 3
(Blu-ray).
1080p 3D Video / Stereo Audio (using embedded
M-series EDID)
Setting the DIP switch to this position will
instruct the matrix to use embedded 1080p
3D compatible video and Stereo audio EDID
to encourage communication between
the matrix and 3D sources/3D displays if
handshake problems are encountered.
After setting the DIP switch, reconnect and
turn on for the changes to take effect.
1080p Stereo (using embedded A-series EDID)
The matrix will use embedded 1080p video
and stereo audio EDID in this DIP setting.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080i Stereo (using embedded L-series EDID)
In instances where a connected display is
unable to achieve 1080p resolution (such
as using older or cheaper models), this
DIP setting will instruct the matrix to use
embedded 1080i video and stereo audio
EDID to output a signal.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
1080p 5.1ch Audio (using embedded D-series EDID)
When set to this DIP position the matrix
will use embedded 1080p video with 5.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080p 7.1ch Audio (using embedded G-series EDID)
When set to this DIP position the matrix
When set to this DIP position the matrix
will use embedded 1080p video with 7.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
Normal Output
Force Output
Instructs the Matrix to Output a signal
regardless of communication between
display and source compatibility. This
setting may be used to further encourage
compatibility between devices if other DIP
settings prove unsuccessful in establishing
communication.
Remaining settings no function
(reserved for future updates)
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
21 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
For example: If OUTPUT 3 is selected for INPUT 1, the EDID
for OUTPUT 3 will be copied to INPUT 1 – this is achieved by
the system setting HDMI OUTPUT as a higher priority than UTP
OUTPUT.
If EDID copy is not successfully completed, the INPUT Port EDID
will remain the unchanged.
RESETTING TO FACTORY DEFAULT:
To reset EDID for all ports, simply set the DIP switch to the above
position when the matrix is powered OFF. On powering ON, all
ports will revert to the above factory default and DIP switches can
be adjusted as necessary.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver
copy)
For users who wish to copy EDID from an AV Receiver with 7.1
channel audio to a specific input port containing a Blu-ray player,
follow a variation on the instructions above:
1 Set the DIP switch to the above position with the matrix in the
OFF position.
2 Connect the AVR to your desired OUTPUT port on the matrix
(for example, OUTPUT 2)
3 Power ON the matrix and select your INPUT your chosen
SOURCE is connected to (for example, INPUT 3 – Blu-ray)
4 Press and hold the OUTPUT SELECT button for 3 seconds for
the EDID data to be copied from OUTPUT 2 (AVR) to INPUT 3
(Blu-ray).
1080p 3D Video / Stereo Audio (using embedded
M-series EDID)
Setting the DIP switch to this position will
instruct the matrix to use embedded 1080p
3D compatible video and Stereo audio EDID
to encourage communication between
the matrix and 3D sources/3D displays if
handshake problems are encountered.
After setting the DIP switch, reconnect and
turn on for the changes to take effect.
1080p Stereo (using embedded A-series EDID)
The matrix will use embedded 1080p video
and stereo audio EDID in this DIP setting.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080i Stereo (using embedded L-series EDID)
In instances where a connected display is
unable to achieve 1080p resolution (such
as using older or cheaper models), this
DIP setting will instruct the matrix to use
embedded 1080i video and stereo audio
EDID to output a signal.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
1080p 5.1ch Audio (using embedded D-series EDID)
When set to this DIP position the matrix
will use embedded 1080p video with 5.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080p 7.1ch Audio (using embedded G-series EDID)
When set to this DIP position the matrix
When set to this DIP position the matrix
will use embedded 1080p video with 7.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
Normal Output
Force Output
Instructs the Matrix to Output a signal
regardless of communication between
display and source compatibility. This
setting may be used to further encourage
compatibility between devices if other DIP
settings prove unsuccessful in establishing
communication.
Remaining settings no function
(reserved for future updates)
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
21 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
For example: If OUTPUT 3 is selected for INPUT 1, the EDID
for OUTPUT 3 will be copied to INPUT 1 – this is achieved by
the system setting HDMI OUTPUT as a higher priority than UTP
OUTPUT.
If EDID copy is not successfully completed, the INPUT Port EDID
will remain the unchanged.
RESETTING TO FACTORY DEFAULT:
To reset EDID for all ports, simply set the DIP switch to the above
position when the matrix is powered OFF. On powering ON, all
ports will revert to the above factory default and DIP switches can
be adjusted as necessary.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver
copy)
For users who wish to copy EDID from an AV Receiver with 7.1
channel audio to a specific input port containing a Blu-ray player,
follow a variation on the instructions above:
1 Set the DIP switch to the above position with the matrix in the
OFF position.
2 Connect the AVR to your desired OUTPUT port on the matrix
(for example, OUTPUT 2)
3 Power ON the matrix and select your INPUT your chosen
SOURCE is connected to (for example, INPUT 3 – Blu-ray)
4 Press and hold the OUTPUT SELECT button for 3 seconds for
the EDID data to be copied from OUTPUT 2 (AVR) to INPUT 3
(Blu-ray).
1080p 3D Video / Stereo Audio (using embedded
M-series EDID)
Setting the DIP switch to this position will
instruct the matrix to use embedded 1080p
3D compatible video and Stereo audio EDID
to encourage communication between
the matrix and 3D sources/3D displays if
handshake problems are encountered.
After setting the DIP switch, reconnect and
turn on for the changes to take effect.
1080p Stereo (using embedded A-series EDID)
The matrix will use embedded 1080p video
and stereo audio EDID in this DIP setting.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080i Stereo (using embedded L-series EDID)
In instances where a connected display is
unable to achieve 1080p resolution (such
as using older or cheaper models), this
DIP setting will instruct the matrix to use
embedded 1080i video and stereo audio
EDID to output a signal.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
1080p 5.1ch Audio (using embedded D-series EDID)
When set to this DIP position the matrix
will use embedded 1080p video with 5.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080p 7.1ch Audio (using embedded G-series EDID)
When set to this DIP position the matrix
When set to this DIP position the matrix
will use embedded 1080p video with 7.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
Normal Output
Force Output
Instructs the Matrix to Output a signal
regardless of communication between
display and source compatibility. This
setting may be used to further encourage
compatibility between devices if other DIP
settings prove unsuccessful in establishing
communication.
Remaining settings no function
(reserved for future updates)
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
21
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
For example: If OUTPUT 3 is selected for INPUT 1, the EDID
for OUTPUT 3 will be copied to INPUT 1 – this is achieved by
the system setting HDMI OUTPUT as a higher priority than UTP
OUTPUT.
If EDID copy is not successfully completed, the INPUT Port EDID
will remain the unchanged.
RESETTING TO FACTORY DEFAULT:
To reset EDID for all ports, simply set the DIP switch to the above
position when the matrix is powered OFF. On powering ON, all
ports will revert to the above factory default and DIP switches can
be adjusted as necessary.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver
copy)
For users who wish to copy EDID from an AV Receiver with 7.1
channel audio to a specific input port containing a Blu-ray player,
follow a variation on the instructions above:
1 Set the DIP switch to the above position with the matrix in the
OFF position.
2 Connect the AVR to your desired OUTPUT port on the matrix
(for example, OUTPUT 2)
3 Power ON the matrix and select your INPUT your chosen
SOURCE is connected to (for example, INPUT 3 – Blu-ray)
4 Press and hold the OUTPUT SELECT button for 3 seconds for
the EDID data to be copied from OUTPUT 2 (AVR) to INPUT 3
(Blu-ray).
1080p 3D Video / Stereo Audio (using embedded
M-series EDID)
Setting the DIP switch to this position will
instruct the matrix to use embedded 1080p
3D compatible video and Stereo audio EDID
to encourage communication between
the matrix and 3D sources/3D displays if
handshake problems are encountered.
After setting the DIP switch, reconnect and
turn on for the changes to take effect.
1080p Stereo (using embedded A-series EDID)
The matrix will use embedded 1080p video
and stereo audio EDID in this DIP setting.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080i Stereo (using embedded L-series EDID)
In instances where a connected display is
unable to achieve 1080p resolution (such
as using older or cheaper models), this
DIP setting will instruct the matrix to use
embedded 1080i video and stereo audio
EDID to output a signal.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
1080p 5.1ch Audio (using embedded D-series EDID)
When set to this DIP position the matrix
will use embedded 1080p video with 5.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
1080p 7.1ch Audio (using embedded G-series EDID)
When set to this DIP position the matrix
When set to this DIP position the matrix
will use embedded 1080p video with 7.1ch
Audio EDID.
After setting the DIP switch, reconnect and
turn on for EDID settings to take effect.
Normal Output
Force Output
Instructs the Matrix to Output a signal
regardless of communication between
display and source compatibility. This
setting may be used to further encourage
compatibility between devices if other DIP
settings prove unsuccessful in establishing
communication.
Remaining settings no function
(reserved for future updates)
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 1 2 3 4
DEFAULT
ON
OFF
ADV
ANCED OPERA
TION