18
1
4
3
2
Once completed, the
EDID
appears here.
Then select your
INPUT
port and press
“Download”
to send the
EDID
to your input
Press
“Save As”
to save the EDID as a
‘BIN file’
Alternatively, you can open EDID from here if
you have previously saved output EDID in bin format.
Recommended if you frequently need to use specific
output EDID, from a particular display, for example
IR Matrix
– manually connects INPUT IR RX ports
to Output Display Receiver IR TX ports – this function is
available when the matrix is connected to display receiver
via the HDBT OUT Cat5e/6/7 port.
IR Matrix
allows manual selection of source device IR RX
ports by Display Receiver IR TX ports
The dropdown menu allows ALL IR TX ports to be
set to ONE specific INPUT device IR RX port with the
current settings of the IR Matrix viewable by pressing the
STATUS button
NETCTL - LAN Control
The matrix can also be controlled via LAN over a network/
web browser using the supplied Wyrestorm NET CTL
software or LAN protocols from third party companies,
such as
Control 4
.
ATTENTION
Use a ‘straight through’ ethernet cable
for switch/router connection and a ‘cross-over’
cable for connection to a PC. Using the incorrect
cable will not damage your equipment, but it may
result in poor/no connection.
Make sure that your LAN cable is correctly
terminated and firmly connected to ports before
running the software.
On initial opening, the program will first create a NETCTL.
TXT file that will serve as a device backup for future use;
including connection settings such as IP address and
MAC address of the
MX0606/0808-PP
, as well as its
name if you decide to change the name of your matrix
(see
Device Name
section below).
On subsequent openings, NETCTL will then search the
Matrix for the saved data required for connection.
If using for the first time, the program will automatically
detect the IP address being used, with the result
displayed in the white area beneath.
Should no result appear or if the system is unable to
detect an IP address automatically, press the
button to locate.
When the IP address appears, click
3
4
5
A
17
1
2
3
4
MX-0808-PP
MX-0606-PP
Technical Support: [email protected] US: +866 677 0053 EU: +44 (0) 1793 230 343
19
Technical Support: [email protected] US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
If using for the first time, the program will automatically detect the
IP address being used, with the result displayed in the white area
beneath.
Should no result appear or if the system is unable to detect an IP
address automatically, press the
button to locate.
When the IP address appears, click
to attach the IP address to the system and the IP address
will change to a default factory serial number MX0606-PP or
MX0606_HE1 / MX0808-PP or MX0808_HE1
Device Name
Should you wish to change the name of your matrix from the
factory default, just right click on the serial number and select
‘rename’
from the dropdown menu. Input the new name and press
OK.
In some systems these settings can be accessed through the
included
Netfinder.exe
application. Click
to locate the device IP address.
Missing image
On either system, when the device name/default factory serial
number appears, double click (or right click and OPEN) and you
will be directed to a web login page in your internet browser.
Enter the default password of ten zeros
‘0000000000’
and click
to take you to the
NETCTL matrix controller screen.
19
Technical Support: [email protected] US: +866 677 0053 EU: +44 (0) 1793 230 343
ADV
AN
CE
D OPE
RA
TI
ON
If using for the first time, the program will automatically detect the
IP address being used, with the result displayed in the white area
beneath.
Should no result appear or if the system is unable to detect an IP
address automatically, press the
button to locate.
When the IP address appears, click
to attach the IP address to the system and the IP address
will change to a default factory serial number MX0606-PP or
MX0606_HE1 / MX0808-PP or MX0808_HE1
Device Name
Should you wish to change the name of your matrix from the
factory default, just right click on the serial number and select
‘rename’
from the dropdown menu. Input the new name and press
OK.
In some systems these settings can be accessed through the
included
Netfinder.exe
application. Click
to locate the device IP address.
Missing image
On either system, when the device name/default factory serial
number appears, double click (or right click and OPEN) and you
will be directed to a web login page in your internet browser.
Enter the default password of ten zeros
‘0000000000’
and click
to take you to the
NETCTL matrix controller screen.
ADV
ANCED OPERA
TION
Summary of Contents for HDBaseT Lite
Page 29: ...29 Technical Support support wyrestorm com US 866 677 0053 EU 44 0 1793 230 343 NOTES ...
Page 30: ...30 Technical Support support wyrestorm com US 866 677 0053 EU 44 0 1793 230 343 NOTES ...
Page 31: ...31 Technical Support support wyrestorm com US 866 677 0053 EU 44 0 1793 230 343 NOTES ...
