www.vanco1.com
800.626.6445
15
EVMX4K16 features RS232 port which is a 3-pin phoenix connector for RS232 control, and the definition of
its pins is listed in the table below.
RS232 CONTROL
1
N/u
Unused
2
TX
Transmit
3
Rx
Receive
4
N/u
Unused
5
Gnd
Ground
6
N/u
Unused
7
N/u
Unused
8
N/u
Unused
9
N/u
Unused
The RS232 port of EVMX4K16 and HDBaseT Receiver support bi-directional communication, there are three
RS232 control modes:
•
Control the EVMX4K16 locally
•
Control the EVMX4K16 remotely
•
Control far-end devices locally
NOTE:
•
Commands are Case-sensitive.
•
Please disconnect all the twisted pairs before sending command EDIDUpgrade[X].
•
In the commands, “[”and “]” are symbols for easy reading and do not need to be typed in actual
operation.
•
End the commands with the ending symbols “.” and “;”.
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Visit www.vanco1.com for control documentation and additional product information and updates
