www.vanco1.com
800.626.6445
13
Control the Source(s) from display location(s)
Connect IR Receiver(s) to IR IN ports on the HDBaseT Receiver, and IR Emitter(s) to IR OUT ports on the EVMX4K16, and
then the local source device (e.g. DVD) can be control via its IR Remote from remote.
Example: Switch HDMI input 3 to HDBaseT output 4.
Connect one IR Receiver to IR IN port on HDBaseT Receiver which is connected to HDBaseT output 4 port, and one IR Emitter
to IR OUT 3 port on EVMX4K16, the connection diagram shown as below:
Example: Switch HDMI input 3 to HDBaseT output 4.
Connect one IR Receiver to IR IN 4 port on EVMX4K16, and one IR Emitter to IR OUT 3 port, the connection diagram shown
as below:
