www.vanco1.com
800.626.6445
5
1. Firmware: Micro USB port for updating firmware when applicable
2. LCD Screen – displays status
3. Power Indicator – Green: Power On; Red: Standby
4. ACT Indicator – Green: Serial communication is active
5. IR Indicator: feedback for IR, blinks Red when IR signal is received
6. Built-in IR Receiver: receives IR signal
7. INPUT selection buttons: Bicolor back-lit buttons, ranging from 0-9
8. OUTPUTS/Built-in EDID selection buttons: Bicolor back-lit buttons, ranging from 0-9. Long-press EDID
button for 3 seconds to enter EDID mode, buttons 1-6 correspond to the 6 embedded EDID data
separately
9. ALL: Select all inputs/outputs
- Splitting one source to all displays: Press INPUT# (source desired), ALL, ENTER
10. EDID management button: Enable input port to manually capture and learn the EDID data of output devices
- EDID learning from specific display: Press EDID, INPUT # (source desired), OUTPUT # ENTER
11. CLEAR: Cancel
12. ENTER: Confirm operation. Press and hold for 3 seconds to enter inquiry mode
FRONT PANEL DESCRIPTIONS
1
2
7
8
9
10
11
12
3
4
5
6
