www.vanco1.com
800.626.6445
17
Controlled by PC(s) in LAN
Connect a router or ethernet switch to the EVMX4K16 via the LAN port (as shown in the following figure). Set the network
segment of EVMX4K16 to the same as the router’s, then any PC within the LAN network are able to control the EVMX4K16.
Follow these steps to connect the devices:
1.
Connect the TCP/IP port of the EVMX4K16 to Ethernet port of PC with Cat5e/6.
2.
Set the PC’s network segment to the same as the EVMX4K16’s. Note and record the PC’s original network segment.
3.
Set the EVMX4K16’s network segment to the same as the router.
4.
Set the PC’s network segment to the original segment.
5.
Connect the EVMX4K16 and PC(s) to the router. PC(s) within the LAN network are able to control the EVMX4K16
simultaneously.
GUI Control – Controlling the EVMX4K16 with an easy to use User Interface
EVMX4K16 provides a built-in GUI for convenient TCP/IP control. GUI allows users to control and switch the EVMX4K16
through graphical icons and visual indicators.
Type 192.168.0.178 in your browser as the address, the log-in interface will display
