Van der Ende Groep. · Aartsdijkweg 23, 2676 LE, Maasdijk · Telefoon 0174 515050
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · [email protected] · www.vanderendegroep.nl
Pagina 8 van 16
1.7
Guarantee conditions
This product is guaranteed for a period of 6 months from the proven date of commissioning, with a
maximum date of 2 years after the date of production. The proven date of commissioning means the
date on which the machine was installed.
If a claim is made on the guarantee, the parts in question must be submitted to the manufacturer for
evaluation.
The warranty will cease to be valid if any of the following conditions apply:
•
Improper use or installation
•
Repeatedly ignoring the advice of the supplier and/or manufacturer
•
Repair, maintenance or use by unauthorized persons
•
Use of unsuitable connections with regard to power supply or cables
•
Use of the machine in an unsuitable environment
•
Intentional damage or adaptations to the machine
The guarantee conditions are conform to the METAALUNIE CONDITIONS (the Dutch organization for
small and medium-sized enterprises in the metal industry) published in January 2014.
1.8
CE mark
The CE mark relates to compliance with the Machinery, Low Voltage, EMC and PED Directives. The
Enmix Light is an unfinished machine and consequently does not meet all the conditions and essential
safety requirements at the time of delivery. A list of the conditions and safety requirements that the
Enmix Light does not meet at the time of delivery may be obtained from the manufacturer.
The CE mark can be found on the sticker affixed to the motor.
According to the Low Voltage Directive, the Enmix Light is classified as a Class I device.
1.9
Residual risks
It is practically and economically impossible to cover all risks for the full 100%. Furthermore, one of
the risks of the machine may be closely connected to its functionality. The so-called residual risks are
shown in the table below. It is important that the user is aware of the risks involved when using this
machine. All safety regulations should be followed in order to minimize the risks as much as possible.
Risk page No. Residual risk description
Risk factor Category
1.
If the mixer is longer than the support legs, which
may or may not be present, the Enmix cannot be
placed in a stable position. This is only applicable
prior to the installation of the Enmix.
1
A
Table 3: List of residual risks
