Van der Ende Groep. · Aartsdijkweg 23, 2676 LE, Maasdijk · Telefoon 0174 515050
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · [email protected] · www.vanderendegroep.nl
Pagina 10 van 16
3
Safety instructions
Please read this assembly manual carefully and ensure that you observe the safety instructions before
installing or using the Enmix Light.
The Enmix Light may only be used within the application areas for which it has been designed.
The Enmix Light has been designed to operate as a mixer for a system in which liquid media are used.
These media may only contain chemical substances that are compatible with the materials of the
Enmix Light components that come in contact with them. Further information on the application areas
can be found under paragraphs 1.5, 1.6 and 1.7.
Work on the machine or installation of the electrical part of the Enmix Light may only be carried out
by qualified personnel.
Make sure the power supply is connected to a final circuit with an earth connection with a maximum
fuse value of 16A and a circuit breaker with residual current of 30mA.
Add solids gradually to prevent blockage of the mixing discs.
Always follow all assembly and safety instructions. Failure to observe these instructions may cause
serious damage to persons or property.
Safety symbol
Description
Automatic starting machine!
Electric voltage present!
Hot surface!
Rotating parts!
Reading instructions obligated!
Table 4: Safety instructions Enmix Light
