background image

Van der Ende Groep. · Aartsdijkweg 23, 2676 LE, Maasdijk · Telefoon 0174 515050 

IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · [email protected] · www.vanderendegroep.nl

 

 

 

 

 
 
 

Pagina 7 van 16 

 

1.3

 

Use 

The Enmix Light is intended to be used for the mixing and continuous agitation of liquids containing 

additives. To achieve this, the Enmix Light must be mounted above a fertilizer bin or other container 
with the mixing disc in the liquid. 

 
In connection with the chemical resistance properties of the materials which make up the Enmix, the 
Enmix cannot and must not be used in just any medium. The manufacturer should be contacted for 

questions and advice in this matter. Upon request, the manufacturer can also provide a list of suitable 
and unsuitable chemicals. 

 
Under no circumstances may the media contain long fibers (longer than 5mm), neither may viscous 
media (>1000 mPas) be mixed with the Enmix Light. 

 
The supplier or the manufacturer should be contacted for advice on the use of media and the Enmix 

Light in general. 
 
The Enmix Light is 

not

 intended to be used without being placed on a liquid reservoir. The Enmix is 

not intended to be used for the purpose of processing foodstuffs. 

 

1.4

 

Users 

Intended users are at least 18 years of age, employed by the company where the Enmix Light is 
installed and appointed by the management as the competent and qualified person to operate the 
Enmix Light. 

  
Unintended users are users who do not meet the above requirements. Unintended users are all users 

who, by using the Enmix Light, create unsafe situations or cause danger to themselves and/or others 

1.5

 

Media 

Placing an image/comment in relation to the Enmix Light should always be discussed in advance with 

the producer/supplier. If this is not observed, any consequential damage can be recovered from this 
person/company. 

1.6

 

Operating environment 

The Enmix Light is intended to be used as a mixer that is mounted on a fertilizer bin or other 
container. When installing the mixer, care should be taken to ensure there is sufficient free space 

around the Enmix Light. The Enmix Light must be mounted on a fertilizer bin or other container of 
liquid substances. 

 
The Enmix Light is not intended for use in explosive surroundings. 

Summary of Contents for Enmix Light

















Reviews: