VAN DER ENDE Airmix G, Installation Manual

Page: 11 / 32

Van der Ende Groep · Aartsdijkweg 23, 2676 LE, Maasdijk · Tel. 0174 515050
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · info@vanderendegroep.nl · www.vanderendegroep.nl
Page 11 of 32
4.2 Suspending the Airmix ™ model G
This chapter describes the sequence of steps that must be taken when suspending the Airmix ™ model
G. You start by installing the aluminum attachment profiles, then the Airmix ™ housing is placed
between the attachment profiles. The fan and the condensate drip tray are then attached to the
housing. Always install the Airmix ™ model G in consultation with the screen installation technician.
The minimum equipment required is shown for each step.
4.2.1 Installing the attachment profiles and Airmix ™ model G
-
Choose a suitable location:
o
use the installation diagram that was supplied by VDEG and/or your installation
technician;
o
make sure that no objects are in the way;
o
make sure that no objects can obstruct the Airmix ™ inlets and outlet;
o
the fan must be installed out of reach of people without special equipment (such as a
stepladder);
o
check that the truss is in good condition;
o
check that there is an electrical connection less than 5 metres away;
-
make sure you have the proper tools and equipment (enough for each person):
Quantity Description
1 Battery impact wrench
1 Torx 25 bit (in impact wrench)
1 8mm socket bit (in impact wrench)
1 13mm open-ended wrench or socket wrench
1 16mm open-ended wrench
1 3mm hex key
-
make sure that the Airmix ™ can be installed safely; two people are needed for installation,
with one person at height for each lattice truss;
-
what you will need for each Airmix ™ :
Quantity Description No. In Figure
5 to 6
Article no. VDEG
1 Airmix model G 15 720052xx
2 Endplate 5 55014310
4 Slide-in bracket for end plate 11 55014380
2 Aluminum attachment profiles 2 580201xx
2 Aluminum cover plate 14 55014330
2 Mounting strips 3 55014320
1 Stainless steel profile connector 17 55014340
2 Stainless steel set screws, hexagon
socket m6x12 4 57023510
10 Stainless steel bolt m8x16 9 57005920
8 Stainless steel fender washer m5 7 57000120
6 Stainless steel fender washer m8 13 57000140
8 Stainless steel washer m8 10 57001140
4 Stainless steel self-locking nut m8 12 57004140
12 Metal screw 4,8x16 6 56033790
17 Metal screw with tapping point 4,8x13 8 56042760
2 Stainless steel plug ¼’’ 16 68032415