VAN DER ENDE Airmix G, Installation Manual

Page: 4 / 32

Van der Ende Groep · Aartsdijkweg 23, 2676 LE, Maasdijk · Tel. 0174 515050
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · info@vanderendegroep.nl · www.vanderendegroep.nl
Page 4 of 32
1 Identification
This overview contains general information about the device. The purpose of this chapter is to indicate
the limits and overall operation of the device, and the areas in which it is used.
1.1 General
1.1.1 Description of the system
The Airmix™ consists of a fan attached to an aluminum housing, which is open at the top and has
three valves at the rear. The Airmix™ model G needs attachment profile for mounting the Airm ix™ at
a truss. The valves are controlled with a gear-rack drive. The Airmix™ has a power cord with a plug
for the fan (only the 50Hz variant) and a power cord for the gear-rack drive. The Airmix™ has no
internal controls.
1.1.2 Specifications
General
Type Airmix™ model G
Maximum dimensions L x W x H 1270 x 630 x 1005 mm
Total weight approx. 38 kg
Fan
50Hz AC 50/60Hz EC 60Hz AC
Power 0.38 kW 0.42 kW 0.24 kW
Voltage 230 V ~1 or 400 V ~3 200-277 V ~1 230 V ~1
Rotational speed 1250 rpm 1470 rpm** 960 rpm
Current 1.7 A 2.1 – 1.5 A 1.05 A
Circulation capacity 5800 m 3 /hour* 5800 m 3 /hour** 5060 m 3 /hour*
Ventilation capacity 5200 m 3 /hour* 5200 m 3 /hour** 4400 m 3 /hour*
Dust and water ingress protection IP54 IP54 IP54
Insulation class THCL155 THCL155 THCL155
Power cord 5 m cord plus Type F
earthed plug None None
Certification CE marking, EAC CE marking, EAC,
cURus (E347018
ZB-155)
CE marking, EAC,
cURus (E111399
ZA-155)
Gear-rack drive
Power 1.5 W
Voltage 24 V AC 50/60 Hz 24 V DC
Functional range AC/DC 19.2 to 28.8 V
Duration 116 sec
Dust and water ingress protection IP54
Adjustment force
150 N
Power cord 5 m cable 3 x 0.75 mm 2 , without plug
Certification CE marking, cULus (E108966)
Airmix™ housing
Material Aluminum 2/3 mm
Number of valves 3
Table 1 Specifications
* Measured without air guide plate and grille, and depending on pressure difference.
** The EC fan has a nominal rotational speed of 1470 rpm. A rotational speed of 1250 rpm gives a
ventilation capacity of 5200 m
3 /hour. The installation drawings and calculations are based on this
rotational speed and ventilation capacity as standard. The EC fan is a fan with internal control. The EC
fan is supplied as standard on the basis of factory settings and non-addressed.