Van der Ende Groep · Aartsdijkweg 23, 2676 LE, Maasdijk · Tel. 0174 515050
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · [email protected] · www.vanderendegroep.nl
Page 22 of 32
If two guide plates are used to restrict the air flow, Figure 18 shows how they are connected to the
mounting bracket.
Requirements:
•
2x Air flow guide plate
•
4x hexagonal tap bolt m5 x 16
•
8x washer m5
•
4x lock nut m5
Figure 18 Connecting two air flow guide plate to mounting bracket
The Airmix
™
comes with an outlet grill which can be mounted in front of the fan outlet by means of
four torx screws.
Whenever air flow guides plates are used in combination with the outlet grill, the plates need to
mounted in reversed position. The guide plates should be attached to the outlet grill with Ty-raps.
