24
Window Re
fi
tting
x 4
To re
fi
t the window, place it on the
fi
rebox frame and
hold it in place while pushing and turning its fastening
studs 90 degrees.
Then, apply light hand pressure against the window
frame sides to bed-in the window seal.
Remote Control Initial Set-up
The receiver and the handset of the remote control
system must be initially synchronized before the
fi
rst
use.
1. Insert alkaline batteries in the remote control
receiver and handset. The receiver is located left of
the control valve under the burner module.
2. With a sharp object, press and hold the receiver’s
reset button until you hear one short and one long
beeps. After the second beep, release the reset
button.
3. Within the subsequent 20 seconds, press the
small
fl
ame button ( ) on the remote handset
until you hear two short beeps con
fi
rming the
sychronization is set.
This is a one time setting only and is not required
when changing the batteries in the remote receiver.
The remote control system is now ready to use.
INSTALLATION
