Valor HORIZON 535, Installation Booklet

Page: 12 / 24

11 of 23
5. SUPPLY GAS
Heater engine unit #535EAN is used with all natural gas installations.
Heater engine unit #535EAP is used with all propane installations.
The supply pressure must be between the limits shown in section 3.2 of this manual.
The supply connection is
3
/
8
’’NPT.
The opening for the gas supply line is at the rear left corner of the appliance.
6. PACK CONTENTS
See figure 11
#535EAN or #535EAP Engine unit
1 Appliance engine unit fitted with window
1 Ceramic ash bed
5 Ceramic logs
1 Firebox ceramic rear wall
2 Firebox ceramic side walls
1 Wall switch & plate (wired)
1 Wire harness
1 Battery holder
4 1.5V AA batteries
1 Port cover
2 Frame side fixing brackets
1 Ash bed rear support
2 Restrictor plates for horizontal termination
installations
2 Restrictor plates for through the roof termination
installations
1 Gas inlet pipe connection adapter
1 Top heat shield panel
1 Frame top support angle
2 Stand-off brackets
2 Screws for wall switch plate
4 Screws for frame side fixing brackets
2 Screws for top heat shield panel
3 Screws for frame top support angle
6 Screws for stand-off brackets
2 Screws for vent fixing
4 Woodscrews for fixing appliance to studding
#601SFB Standard metal front (Alternative)
1 Upper louver unit
1 Lower louver unit
2 Side channels
2 Hinge studs
2 Hinge spacers
2 Magnet counterplates
#602CFB Cast iron front (Alternative)
1 Top casting unit
1 Bottom casting unit
#553RCK Remote control unit (Additional option)
1 Receiver unit
1 Remote control hand unit
1 9V Battery
#609WEK Wall switch extension wires (Additional
option)
1 10ft long extension wire harness
#551DVK Standard horizontal through-the-wall vent
kit
(Alternative to Dura-vent unit)
1 Vent pipe & terminal unit
2 Wall plates
2 Wall shields (Supplied flat)
12 Thread cutting screws
1 Styrofoam cutting support do-nut
8 Wood screws
8 Wall plugs
#555CFK Circulating fan kit (Additional option)
Details are with the kit
#603FSK Black or #604 Champagne Additional
optional 3 sided trims
1 Top trim
2 Side trims
2 Trim fixing brackets
2 Corner connection plates
8 Grub screws for corner connections
10 Screws for side trims & engine attachment
#605FSK Black or #606FSK Champagne Additional
optional 4 sided trims
2 Top & bottom trims
2 Side trims
2 Trim fixing brackets
4 Corner connection plates
16 Grub screws for corner connections
10 Screws for side trims & engine attachment
Take care when removing the contents from the packaging to prevent damage. Check that all the contents are in the packs and
are undamaged.