Figure 6
4.3.
Horizontal side termination
See figures 5 &6.
Can be used with either #551DVK standard vent kit
or #984 Dura-vent terminal cap and accessories.
Adapter #817VAK, one 90° vent elbow #990B and
Dura-vent pipe lengths will be required.
(See venting options section of this manual).
All vent length dimensions and clearance limits are
as section 4.2.
The minimum floor location is shown in figure 6.
Figure 7
4.4.
Horizontal side or rear snorkel
termination
The dimensional requirements in sections
4.2 and 4.3 apply.
Adapter #817VAK, one 90° vent elbow
#990B and Dura-vent pipe lengths will be
required.
#942 Dura-vent thimble kit may also be
necessary.
(See venting section of this manual).
4.5.
Corner location, horizontal
termination, 45° pipe bend
See figures 5 & 7.
Can be used with either #551DVK standard
vent kit or #984 Dura-vent terminal cap and
accessories.
Adapter #817VAK, one 90° vent elbow
#990B and Dura-vent pipe lengths will be
required. (See venting section of this
manual).
All vent length dimensions and clearance limits are as section 4.2.
The minimum corner location is shown in fig. 7.
4.6.
8 of 23
