background image

INSTALLER’S AND OWNER’S GUIDE

Page 2

CUSTOMER CARE

All our heaters are designed to meet the most stringent quality, performance and safety
requirements to provide our customers with many years of trouble free service.  This
guide aims to improve your understanding and appreciation of your new heater, by
providing simple and informative instructions to enable you to install it and to ensure that
you benefit from the excellent performance and features it has to offer.

IMPORTANT SAFETY INSTRUCTIONS

It is important that the following safety instructions are followed

Always

 

Always

 install the heater in accordance with the instructions, if in doubt obtain expert

advice.

 

Always

 make sure the electrical socket is accessible and located adjacent to, but not

above the heater.

 

Always

 disconnect the heater from the electrical supply before carrying out cleaning,

maintenance or replacing lamps.

 

Always

 make sure the heater is firmly fixed to prevent the fire from being tipped over.

 

Always

 use a fireguard when young children and infirm persons can come into

contact with the heater.

 

Always

 use genuine spares.

Never

 

Never

 leave children unsupervised in a room where the heater is on and unguarded.

 

Never

 obstruct or cover the fan outlet or force items into heater openings.

 

Never 

install or use the heater anywhere where water is in use, i.e. bathrooms, shower

rooms etc.

 

Never

 use aerosols on or around the heater.

 

Never

 route the mains supply cable under carpet etc.

 

Never

 install the heater close to curtains or combustible materials.

 

Never

 use the heater to dry clothes etc.

Summary of Contents for alisa 802











Reviews: