INSTALLER’S AND OWNER’S GUIDE
Page 7
Figure 6.
Fitting the Front
Carefully locate the bottom sides of the front
surround into the side brackets on the heater
body. Holding the top of the surround push it
towards the top of the heater body. The top of the
surround should locate over the top central
bracket on the heater body. Push down to fully
locate (See figure 6).
The firefront casting is free standing. Place this
centrally in front of the heater.
Fuel Effects
Open the polythene bag containing the loose pebbles and place them on the fuel support
to give the most pleasing effect. It is not necessary to use all the pebbles supplied.
The pebbles are for decorative use only. There is a Choke risk for young children.
Make sure that young children can not gain access to the pebbles.
