VALMETAL H Series, Operator'S Manual And Parts Book

Page: 23 / 86

When attaching the machine, follow this procedure:
1. Clear the area of bystanders, especially small
children.
2. Make sure there is enough room and clear-
ance to safely back up to the machine.
3. Use the jack to raise the hitch to align the clevis
with the tractor drawbar. See figure 7.
4. Slowly back the tractor up until the drawbar and
clevis are aligned.
5. Be sure the drawbar is positioned to give the
required spacing dimension. Adjust if required
to give dimension (refer to tractor manual for
adjustment procedure).
4.7 ATTACHING / UNHOOKING MACHINE
Fig. 5 MACHINE Fig. 6 DRAWBAR DIMENSION
540 RPM
14 INCHES
OPERATION
19