4.4
PRE-OPERATION CHECKLIST
Efficient and safe operation of the ValMetal Round Bale Grinder requires that each operator reads and under-
stands the operating procedures and all related safety precautions outlined in this section. A pre-operation
checklist is provided for the operator. It is important to follow this checklist in order to ensure personal safety
and the good mechanical condition of the machine.
Before operating the Grinder and each time thereafter, the following areas should be checked off:
1. Lubricate the machine according to the
schedule outlined in the Maintenance Section.
2. Check all fluid levels. Add as required.
3. Walk around the machine and inspect for
material entangled in moving parts and shafts.
Remove all material.
4. Check condition of sections. Straighten or
replace as required.
5. Check and remove any material entangled in
the rotor, auger or blower.
6. Check tension of all belts and roller chains.
Adjust as required.
7. Check that all bearings turn freely and no
wrapping has occurred on rotor shaft.
8. Check that all hydraulic fittings and connections
are tight and in good condition.
9. Be sure all guards and shields are in place,
secured and functioning as intended.
OPERATION
16
Summary of Contents for H Series
