Vallox Vallox TSK Multi 80 MV, Manual

Page: 12 / 108

12
INTRODUCTION
TIP
The MyVallox Control control
panel automatically switches to
the sleep mode when the
Sleep
time
set in the
Display settings
has elapsed. You can wake up
the control panel by pressing
any control panel button.
VENTILATION UNIT CONTROL
Connecting the ventilation unit to the
cloud service
The ventilation unit can be connected to the MyVallox
Cloud cloud service. The cloud service allows for controlling
ventilation remotely also, using e.g. a smartphone or tablet.
Also the unit software is updated automatically through
the cloud service. To connect to the cloud service, the
ventilation unit must be connected to the Internet via LAN
and registered with the cloud service. At the same time you
create a MyVallox Cloud account for yourself. Read more
about the service at www.myvallox.com.
Ventilation unit control options
Operation of the Vallox ventilation unit can be controlled by
the following means:
• Through the control panel installed in the building
• Through the MyVallox Home local area network
connection and the MyVallox Home/Cloud user interface.
• Through the MyVallox Cloud cloud service and the
MyVallox Home/Cloud user interface.
• Through a remote monitoring service or building
automation that uses voltage signals or Modbus
messages
In addition to the integrated humidity sensor, ventilation
can also be adjusted automatically using the optional
carbon dioxide and humidity sensors. When these are
used, ventilation remains optimal even when the dwelling is
unoccupied.
Each user can use the week clock to adjust the ventilation to
fit their individual lifestyle.