Autobipolar Electrode Function
5-6
ForceTriad User’s Guide
2.
Select the power output mode waveform by touching the associated button at
the bottom of the tab. The waveforms available in the Autobipolar mode are
Low, Standard, and Macro.
3.
Set the power to the desired output level by touching the green up and down
arrows. Power output is displayed in watts.
4.
To change the autobipolar activation parameters, touch the green Setup
button.
The setup display will appear in the autobipolar tab.
5.
To enable RF activation without needing to depress the footswitch, touch the
Auto button.
or
To restrict RF activation to the footswitch, touch the footswitch/handswitch
button.
6.
Set the desired RF output delay by touching one of the six delay times
available under the timer symbol.
7.
Set the desired impedance level at which RF energy will be discontinued by
touching one of the four impedance values under the impedance symbol.
8.
Touch the green back arrow button
to return to the autobipolar
activation display. The settings selected in the setup display will appear in the
autobipolar display.
9.
Activate autobipolar by closing the instrument forceps tines firmly or by
stepping on the single-pedal footswitch. An activation tone will sound.
10.
To return the energy platform to bipolar functionality, touch the green Bipolar
button. The bipolar tab will replace the autobipolar tab.
or
Turn the system off. The next time the system is turned on, it will default to
the bipolar function, and the bipolar tab will be visible.
Summary of Contents for ForceTriad
Page 1: ...User s Guide ForceTriad Energy Platform...
Page 6: ...vi ForceTriad User s Guide...
Page 34: ...3 6 ForceTriad User s Guide...
Page 100: ...9 26 ForceTriad User s Guide...
