Valleylab ForceTriad, User Manual

Page: 38 / 100

Monopolar Function Overview
4-4 ForceTriad User’s Guide
Monopolar Function Overview
Monopolar Power Output Modes
The ForceTriad energy platform produces two cut modes, Pure and Blend; one
Valleylab mode; and two coag modes, Fulgurate and Spray.
Monopolar Footswitch
The ForceTriad energy platform in the monopolar mode can accommodate a
monopolar footswitch when used with the accompanying adapter. This
monopolar footswitch controls only those instruments connected to the accessory
receptacle controlled by the left panel.
If you plan to use a footswitching monopolar instrument, attach the monopolar
footswitch adapter to the monopolar footswitch receptacle on the rear of the
system.
Warning
Electric Shock Hazard
• Do not connect wet instruments to the system.
• Ensure that all instruments and adapters are correctly connected and that no
metal is exposed at any connection point.
Connect instruments to the proper receptacle. Improper connection may result in
inadvertent instrument activation or other potentially hazardous conditions.
Follow the instructions provided with electrosurgical instruments for proper
connection and use.
The instrument receptacles on this energy platform are designed to accept only
one instrument at a time. Do not attempt to connect more than one instrument at
a time into a given receptacle. Doing so will cause simultaneous activation of the
instruments.
Caution
Read the instructions, warnings, and cautions provided with electrosurgical
instruments before use. Specific instructions are not included in this manual.
Inspect instruments and cords (especially reusable instruments and cords) for
breaks, cracks, nicks, and other damage before every use. If damaged, do not
use. Failure to observe this precaution may result in injury or electrical shock to
the patient or surgical team.
Caution
Connect only Valleylab-approved footswitches. Using footswitches from other
manufacturers may cause equipment malfunction.