Valhalla Scientific 4300C, Operation Manual

Page: 59 / 84

57
KEY COMMAND
Presses a key from the interface, use for macros when the command you desire is not
listed here.
Syntax: KEY <key number>
Response: <crlf> (only after the key has been processed)
Key number = 0 - 24
0 KEY_NO_KEY
1 KEY_0
2 KEY_3
3 KEY_CLEAR
4 KEY_9
5 KEY_LOCAL
6 KEY_RESET
7 KEY_FUNC
8 KEY_ENTER
9 KEY_DP
10 KEY_RANGE_4
11 KEY_2
12 KEY_RANGE_5
13 KEY_5
14 KEY_RANGE_6
15 KEY_8
16 KEY_6
17 KEY_NOTUSED
18 KEY_RANGE_2
19 KEY_1
20 KEY_RANGE_1
21 KEY_4
22 KEY_RANGE_0
23 KEY_7
24 KEY_RANGE_3
KEY_UPDATE KEY_1
KEY_HLC KEY_2
KEY_ADDR KEY_3
KEY_RUNHOLD KEY_4
KEY_PRINT KEY_5
KEY_TCM KEY_6
KEY_AUTO_RNG KEY_7
KEY_CAL KEY_8
KEY_BCD KEY_9
KEY_VIEW KEY_0
KEY_DISPLAY KEY_1
KEY_mk KEY_DP
Power-on default = 0
Note: The remote key macro command was developed so our customers can literally
perform any action from the remote available to the key press enthusiast. This capability
is not without restrictions. Illegal key sequences may get the machine in a menu you do
not expect or cause the meter to not process properly the keys you send. Key presses are
human interface and therefore not buffered.
Because of this key delays may be necessary as sending keys too quickly may lose keys.