Valhalla Scientific 4300C, Operation Manual

Page: 54 / 84

52
You can execute any command with preceding white space characters. You must use at least one space
between the parameter and the command header. Subsequent parameters are separated by commas.
Combining Commands
You can use a semicolon (;) to combine commands, but not queries.
Example:
RANGE 4; HLCHI 14.999<LF>
Synopsis of Commands
The tables in this section summarize the commands of the programmable 4300C Ohmmeter.
DETAILS OF COMMAND REFERENCE
Each command in this section will give a detailed description. The examples of each command will be
provided and what query form might return.
Syntax and return values for each are explained in the function header. The “*STB?” gives the status of
the command.
Remote mode is entered when a valid printable character is received and is exited with the LOCAL front
panel key or LOCAL command.
COMMAND INDEX
*RST COMMAND ...................................... 64
*STB? QUERY ............................................ 65
*TST? QUERY ............................................ 66
CALDATE QUERY ....................................... 53
CLS COMMAND ........................................ 53
CURRENT RANGE COMMAND .................. 61
FAULT COMMAND .................................... 53
FAULT QUERY ........................................... 54
HLC COMMAND ........................................ 54
HLC QUERY ............................................... 54
HLCHI COMMAND .................................... 55
HLCHI? QUERY .......................................... 55
HLCLO COMMAND ................................... 55
HLCLO? QUERY ......................................... 56
IDN? QUERY .............................................. 56
KEY COMMAND ........................................ 57
KEY? QUERY ............................................... 58
LOCAL COMMAND .................................... 59
LOG COMMAND ........................................ 59
OHMS? QUERY .......................................... 60
OPT? QUERY .............................................. 60
RANGE? QUERY ......................................... 61
RDNG? QUERY ........................................... 63
RESET COMMAND ..................................... 63
SAVSETUP COMMAND .............................. 64
SAVSETUP? QUERY .................................... 64
TCM COMMAND ....................................... 66
TCM QUERY ............................................... 66
TEST CURRENT COMMAND ....................... 62
TEST CURRENT QUERY............................... 62
VOLTAGE RANGE COMMAND ................... 60
VOLTAGE RANGE QUERY ........................... 62