MUS033202
18/10/2010
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 [email protected] www.valcomelton.com
44
5º
Increase the air pressure until the adhesive flows through the bleed
hole and leaves the filter free of any contaminating particles.
6º
Close the bleed valve with a screw driver.
7º
Return the pressure to the appropriate working pressure.
5.3. STOPS:
There are two cases:
Pump stop:
If you wish to stop pumping, you must turn the pressure regulator to 0.
The temperature control will maintain the equipment temperature.
If the stop is to be for an extended period, activating the Low
Maintenance function is recommended. (See chapter 4.4, point D)
Total stop:
To completely disconnect the equipment, press the general switch.
