MUS033202
18/10/2010
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 [email protected] www.valcomelton.com
13
Bleed electrovalve:
The element that controls the passage of air to the pump. It is
electrically connected to the electrical control system.
2.2.5. Control Panel
The control panel containing the machine’s operating and adjustment
switches is on the front of the main electric closet.
2.2.6. Vacuum feeding:
The vacuum feeding is used to load the adhesive, this systems is
controlled through sensors that automatically detect the end of the
adhesive; in the adjustment section it must be fixed as STATED.
In the event the sensor should detect a low level of adhesive, the valve
will open and the chipping loader will convey the adhesive until a
higher level of adhesive is detected. In the event the adhesive is not
loading after 200 seconds, an amber light will flicker and an alarm beep
will ring.
The moment the lid of the chipping loader is opened it will deactivate.
In order to activate it, the lid must be closed and correctly locked.
