MUS033202
18/10/2010
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 [email protected] www.valcomelton.com
20
Try to avoid installing the equipment where there are draughts. If this is
not possible, the guns will need protecting because if the temperature
falls rapidly they may not work properly.
3.4. MECHANICAL INSTALLATION:
The mechanical installation includes the following:
Positioning the equipment.
Connecting the hoses.
Positioning the equipment:
Remove from the box, and position according to installation
requirements (chapter 3.3)
Connecting the hoses
:
Proceed as follows
:
Make sure that the equipment is depressurised before connecting
the hose. Set the motor control selector to zero and bleed with bleed
valves. Heat the machine to melt any adhesive that may be present.
